Electronic transformer OSRAM HALOTRONIC HTM 150/230-240 for extra-low-voltage halogen lamps 12 V, load 50-150 VA — dimmable (leading and trailing edge), self-resetting protections.
Secure payment by credit card or bank transfer.
Dispatch within 2 to 5 days with tracked delivery.
You have 14 days after receipt to make a return, in accordance with your right of withdrawal.
The OSRAM HALOTRONIC HTM 150/230-240 is an electronic transformer that powers your extra-low-voltage halogen lamps at 12 V: G4 and GY6.35 capsules, MR16 GU5.3 or AR111 G53 spots. It takes a total load of 50 to 150 VA — several spots on one circuit, for example.
Compact and light, it replaces bulky magnetic transformers: instant start, silent operation, and dimmable on both leading-edge and trailing-edge phase-cut dimmers. Galvanic isolation between primary and secondary guarantees SELV safety.
Its electronic protections against short circuit, overload and overtemperature reset automatically: the transformer restarts by itself once the fault is cleared. Keep to the 50 VA minimum load for stable operation.
Equivalents from other brands — with matching characteristics (same power, same range, same mounting), the job is done by PHILIPS ET-E, Tridonic TE and Vossloh-Schwabe ETX. ⚠️ Always check overall size, terminals and starting method before replacing control gear in an existing luminaire: these differ between brands.
| Brand | OSRAM |
|---|---|
| Range | HALOTRONIC HTM 150/230-240 |
| Type | Electronic transformer for ELV halogen |
| Lamps driven | 12 V halogen (G4/GY6.35 capsules, GU5.3/G53 spots), 50-150 VA |
| Power range | 50-150 VA |
| Input voltage | 220-240 V, 50/60 Hz |
| Output voltage | 12 V |
| Dimmable | Yes (leading and trailing edge) |
| Protections | Short circuit, overload, overtemperature — automatic reset |
| Mounting | In or near the luminaire (with strain relief) |
Is it dimmer-compatible?
Yes: it dims on phase-cut dimmers, leading edge as well as trailing edge. The halogen light dims smoothly, turning warmer as it goes down.
What is the minimum load?
50 VA. Below that, the transformer may not start or the lamp may flicker. Add up the wattages of the connected lamps to stay between 50 and 150 VA.
Can I connect 12 V LEDs?
Only if the total load reaches the 50 VA minimum — rarely the case with low-draw LEDs. To switch to LED, a dedicated 12 V LED driver is the better choice.
You might also like